OWNER’S MANUAL
9
1. Set up the pool by following all the instructions that came with
the pool. Do not fill water until the Filter Pump is properly
installed. Locate the Outlet and Inlet openings on the pool wall.
3. Install the Return Fitting on the Inlet opening of the pool.
2. Install the Suction Fitting on the Outlet opening of the pool.
SETUP INSTRUCTIONS
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTRATION SYSTEM TO GAIN ACCESS TO THE POOL.
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
Inlet
opening
Outlet opening
4
3
1
2
Outside Pool Wall
Inside Pool Wall
7
8
6
9
11
12
10
Outside Pool Wall
Inside Pool Wall
4. Remove the Filter Pump
y
, Hoses
r
and Hose Clamps
t
from the package.
15
13
14