18
INSTALLING THE METAL PLATE
continued
• Adjust the distance between the two metal plates if necessary to fit the top ledges. Make sure that
you place the longer side of the top ledge facing out and the shorter side facing inside the pool.
Once you have fixed all the ledges into position, line up the screw holes and lightly fasten with the
bolts, washes, lock washes and nuts provided (see diagram 29).
Fix all top ledges to the top metal plates.
Make sure they are all adjusted properly before finally tightening the bolts.
FIXING THE BOTTOM LEDGE JOINT COVER
• Attach thebottom ledge joint cover to the vertical support, using the screws provided in the
package (see diagram 30)
(Diagram 30)
(Diagram 29)