9
Special Features
High Volume or Low Volume Mode
Setting to high or low volume mode depends on user’s helmet design or
structure. Some helmet types may require near or far positioning of the
InterPhones
Ear Speaker(7)
from the user’s ear. Please try both modes to
discover which mode is appropriate for your helmet.
High Volume Mode Activation
is advised if you position the
Ear Speaker(7)
far from your ear. This will enable you to still have a clear and audible audio.
Procedure:
1. From Off, press and hold the
Volume Up(3)
.
2. Keep the
Volume Up(3)
pressed and then press the
MFB(1)
for 5
seconds.
3. Power On beep followed by a HIGH TONE can be heard. The
Status
Indicator(2)
will flash red-blue.
4. Release both buttons.
Note: Be careful. At full volume, the Ear Speaker(7) can be very loud. Do
not position your Ear Speaker close to your ear.
Low Volume Mode
Activation
is advised if the positioning of your
Ear
Speaker(7)
is very near to your ear.
Procedure:
1. From Off, press and hold the
Volume Down(4)
.
2. Keep the
Volume Down(4)
pressed and then press the
MFB(1)
for 5
seconds.
3. Power On beep followed by a LOW TONE can be heard. The
Status
Indicator(2)
will flash red-blue.
4. Release both buttons.
