Blueant Interphone none, User Manual

8

Reject a Call 

(For Handsfree Profile Phones only)

:  

To reject an incoming call just press the 

MFB(1)

 for 2 seconds (2

nd

 beep). 

Or, Assuming the 

InterPhone Voice Answer and Reject 

is activated, be 

silent for 10 seconds. The call will  automatically be rejected. 

Note: See InterPhone Voice Dial and Reject Activation / Deactivation on page 10  

Audio Transfer

 (For Handsfree Profile Phones only)

: 

During an ongoing call, audio transfer can be made. 
 
    From BLUEANT INTERPHONE to Phone: 
  Press 

the 

MFB(1)

 for 2 seconds (2

nd

 beep). The audio will be transferred to  

  the 

phone. 

     
    From Phone to BLUEANT INTERPHONE: Press the 

MFB(1)

 for 1 second (1

st

      beep). The audio will be transferred back to the headset.  
 

Volume Settings:    

Note: This is for basic volume adjustment once set up. Please see the section in 
Special Features on High or Low Volume Mode to set the correct volume range for 
your helmet. 
 

Press  

Volume Up(3)

 or 

down(4)

 button until desired level is reached. 

Automatic Volume Adjustment

. When the bike is in motion (motorcycle 

running and there is driving and background noise): The BLUEANT INTERPHONE 
will automatically adjust the volume in response to the background noise. Thus, 
the user can continuously hear the audio clearly even when there is loud 
background noise. 
 

Reconnect the Interphone: 

 
To reconnect your cell phone to the Interphone after switching off or going out  
of range. 
 

1) Turn the Interphone ON and Press the MFB(1) once (first beep)  
2) Or, use your phones Bluetooth Menu to connect