Blueant Supertooth Light, Frequently Asked Questions Manual

                                                                                                                                                                    
4

7. Is my phone compatible?

If your phone has Bluetooth, it more than likely supports a Handsfree or Headset

Bluetooth profile, so will work with the Supertooth Light. Check your phones manual to see 

if it supports Bluetooth Headset or Handsfree profile.

8. What is the passcode/passkey of the Supertooth Light?

The Passcode for the Supertooth Light is “0000”. 

9. Can I change the passcode of the Supertooth Light?

No. The passkey is inbuilt and cannot be changed. 

10. Can I use voice activated dialling? 

Yes the  Supertooth Light supports  voice  activated  dialling  if  your phone  also supports this 

feature. Check your phones user manual for information on setting this feature up and how 

to  record  voice  commands.  Headset  profile  is  becoming  outdated,  thus  fewer  phones  are 

released only with Headset profile these days. 

11. Can I use the Supertooth Light to listen to music on my cell phone?

Cell Phoness that use the Handsfree profile are able to send music to the Supertooth Light, 

but it will be a mono signal and will sound a bit like an AM radio. 

12. How often should I charge my Supertooth Light?

You only should charge the Supertooth Light when the LED Indicator starts to flash red. The 

battery  will  last  for  about  800  hrs  on  standby  and  much  longer  if  the  Supertooth Light  is 

switched off in between uses. 

13. Can I use my Supertooth Light with my computer for VOIP applications?

Yes,  you  can  connect  the  Supertooth  Light  to  a  PC  or  Mac  that  supports  the  Headset  or 

Handsfree profile. To do this you need to have Bluetooth enabled in your computer by using 

a Bluetooth USB Dongle or having a computer that has inbuilt Bluetooth. Depending on the 

Bluetooth Software the connection process is different. Simply put the Supertooth Light into 

Pairing  mode,  then  search  for  it  using  your  computers  Bluetooth  Software.  Enter  the 

Passkey “0000” then start the Headset/Handsfree service.