4 Getting Started
15
Removing the Installed Device
1
Spread the cradle by pulling the both sides of it.
2
Push upward on the lower part of the mobile device and remove it.
2
1
1
RFR900
The RFR900 is designed to prevent the mobile device from detaching from the RFR900, so removing
the mobile device may be difficult.
4.3.2 Connecting via Bluetooth
You can wirelessly connect to a mobile device via Bluetooth. You can read and send data to the connected
device via Bluetooth.
Because Bluetooth wireless technology uses radio waves to communicate, devices do not need to have a
direct line of sight. However, they must be within 10 meters (33 feet) of each other, although the connection
may be subject to interference from obstructions, such as walls or other electronic devices.
Pairing with an Android Device
To pair with an Android device,
1
On the mobile device, tap
Settings
>
Bluetooth
.
2
Turn on the Bluetooth feature.
3
On your RFR900, press and hold the Mode button for approximately 3 seconds to enter Bluetooth pairing
mode.
Do not forcefully press and hold the Mode button. This can damage your device.
If your RFR900 does not pair with another device within 3 minutes, it will exit Bluetooth pairing
mode.