06
3 Getting Started
This chapter explains the basics of how to use the device, including how to charge the device, and turn it on
or off. Subsequent chapters teach you how to navigate Windows or Android and customize the device, but
the information in this chapter will help you start the device for the first time and configure basic settings.
3.1 Inserting a USIM Card
USIM cards allow the device to connect to mobile networks.
Insert the USIM card into the slot until you hear a click.
• Make sure that the gold-colored contacts are facing up.
Do not insert the USIM card into an incorrect slot. Check the shape and orientation of the slot to
ensure that it is designed for a USIM card.
To remove the USIM card, see
10.2 Removing a USIM Card on page 30
.
3.2 Charging the Device
The device charges when connected to the power adapter or resting in the cradle (optional).
• Do not attempt to charge the device with anything other than the adapter it shipped with.
• Charge the device fully before using it for the first time. Failure to do so may decrease the life of
the battery.
To Charge with the USB Cable
1
Plug the USB cable into the port.
• The battery LED turns red when the battery is charging.
• The battery LED turns white when the battery is fully charged.
• The battery LED blinks red and white alternately at 1 second intervals when the battery has a
problem, such as it being too hot or too cold
Continuing to charge the device when the battery is full will not damage the battery.