Bluefin LED GW20IFM Installation Manual Download

Page: 6 / 7

After installation ensure again that the light is illuminated correctly before the boat goes back into
the water and you remove the lens label.
After you boat goes back into the water check internally for water tightness around where the light is
installed.
The light has internal indicator L

ed’s for fault finding, these are as follows:

•

Over voltage will flash red.(check the voltage to the light)

•

Under voltage will show a constant red. (check the voltage to the light)

•

Over temperature will show amber.(allow the light to cool down and check if submerged)

Maintenance:

Regularly check the installation for water tightness
Only clean the light with a soft bristle brush

Warranty:

For any warranty issues please contact your point of sale retailer or go to

www.bluefinled.com

for

further advice.

Bluefin LED LTD warrants the lights/hardware it manufactures and produces to be free from

defects in workmanship and materials for a period of two years, starting from the date of original

purchase, as recorded on the sales receipt.

The warranty is non-transferable and limited to the original purchaser of the product. During the

two year warranty period Bluefin LED will repair or replace the defective item (at its option) at no

additional charge on a “like for like” basis. Products either repaired or replaced under this

warranty shall only be warranted for the unexpired portion of the warranty applying to the original

product(s).

Bluefin LED is not responsible for labour charges to remove or replace lights or for haul-out fees.

No refunds will be given.

This limited warranty does not extend to any products which have been damaged as a result of

misuse, abuse, improper installation/modification, galvanic corrosion, failure to follow and adhere

to installation instructions provided by Bluefin LED, improper shipping, neglect, damage caused

by disasters such as fire, flood, lightning “acts of god”, installation by unqualified personnel.

Do not attempt to disassemble the light without Bluefin LED advice.

Installer please ensure that the SERIAL NUMBERS of the lights are written below and the
manual is handed over to the end user.
Please make a note of the serial numbers of the lights here.
SERIAL NUMBERS