(50℃)
Keep the Nailer, fuel cells andbattery
120
°
F MAX
away from sunshine and from
temperature exceeding 120°F
(50°C).
Fuel cell and/or battery may burst,
releasing flammable gas.
Do not pierce or burn the container,
even afteruse.
Do not incinerate, refill, reclaim
or recycle the fuel cell.
Do not spray to a naked flame or any
incandescent material.
Keep away from ignition sources
No smoking.
Keep out of the reach of children.
WARNING
5.
NEVERPOINT TOOL AT YOURSELF OROTHERS
IN WORK AREA.
Always assume the Nailer contains
fasteners.
Never point the Nailer at yourself or
others, whether it contains fasteners
or not.
If fasteners are mistakenly driven, it can lead to
severe injuries.
Never engage in horseplay with the Nailer.
Respect the Nailer as a working implement.
6.
K E E P F I N G E R S A WA Y FROM TRIGGER
W H E N N O T D R I V I N G FASTENERS TO
AVOID ACCIDENTAL FIRING.
Never carry the Nailer with finger on trigger
since you could drive a fastener unintentionally
and injure yourself or someone else.
Always carry the Nailer by the handle only.
7.
ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears
from loudnoise.
Always wear head protection to protect your head
from flying objects.
8.
USE OUTSIDE OR WELL-VENTILATEDAREAS.
This Nailer shall not be used in
enclosed or poorly ventilated areas.
This Nailer exhausts carbon monoxide
which is a danger to health when
inhaled.
Do not inhale.
9. STORE NAILER PROPERLY WITH FUELCELL
AND BATTERY REMOVED.
When not in use, the Nailer, fuel cell and battery
should be store in tool case and in a dry place.
Storeindoorsat temperature41°F(5°C)
～
77°F
（
25°
C
）
. Keep the Nailer, fuel cell and battery out of
direct sunlight and out in a vehicle.
Keep out of reach of children.
Lock the storage area.
10.
KEEP WORK AREACLEAN.
Cluttered areas invite injuries. Clear all work areas
of unnecessary tools, debris, furniture,etc.
11.
KEEP VISITORS AWAY.
Do not let visitors handle the Nailer.
All visitors should be kept safely away from work
area.
12.
DRESS PROPERLY.
Do not wear loose clothing or jewelry as they can
be caught in moving parts.
Rubbe r gloves an d non skid footwear are
recommended when working outdoors.
Wear protective hair covering to contain long hair.
13.CHECK FIRING HEAD BEFORE USE.
Remove
fuel cell and battery, and then make sure the firing
head operates properly. Never use the Nailer
unless the firing head is operating properly,
otherwise the Nailer could drive a fastener
unexpectedly. Do not tamper with or remove the
firing head, otherwise the firing head becomes
inoperable.
14.KEEP ALL SCREWS AND COVERS
TIGHTLY IN PLACE.
Keep all screws and covers tightly mounted.
Check their condition periodically.
Never use the Nailer if parts are missing or
damaged.
15.DO NOT LOAD FASTENERS WITH
TRIGGER OR FIRING HEAD DEPRESSED.
When loading fasteners into the Nailer,
1) do not depress the trigger;
2) do not depress the firing head;
3) keep the Nailer pointed downward.
16.KEEP FACE, HANDS AND FEET AWAY
FROM FIRING HEAD DURING USE.
Never place your face, hands or feet closer than 8
inches (200 mm) from the firing head.
A serious injury can result if the fasteners are
deflected by the workpiece, or are driven away
from the point of entry.
2
17.
PLACE NAILER PROPERLY ON WORKPIECE.
Do not drive fasteners on top of other fasteners
or with the Nailer at too steep of an angle; the
fasteners can ricochet and hurt someone.
18.
D O NO T DR IVE FA STEN ER S IN TO THIN
BOARDS OR NEAR CORNERS AND EDGES
OF WORKPIECE.
The fasteners can be driven through or away
from the workpiece and hit someone.
19.
NEVER DRIVE FASTENERS FROM BOTH
SIDES OF A WALL AT THE SAME TIME.
The fasteners can be driven into and through
the wall and hit a person on the opposite side.
20.
CHECK FOR LIVE WIRES.
Avoid the risk of severe electrical shock by
checking for live electrical wires that may be
hidden by walls, floors or ceilings. Turn off the
breaker switch to ensure there are no livewires.
21.
DO NOT OVERREACH.
Keep proper footing and balance at
all times. Do not operate the nailer on a
ladder.
22.
NEVER USE NAILER WHICH IS DEFECTIVE
OR OPERATING ABNORMALLY.
If the Nailer appears to be operating unusually,
making strange noises, or otherwise appears
defective, stop using it immediately and arrange
for repairs by a dealer authorized service center.
23.TAKE FUEL CELL AND BATTERY OUT OF
NAILER WHEN:
1) doing maintenance and inspection;
2) clearing ajam;
3) it is not in use;
4) leaving work area;
5) moving it to another location;
6) handing it to another person.
Never attempt to clear a jam or repair the Nailer
unless you have taken fuel cell and battery out
of the Nailer and removed all remaining fasteners
from the Nailer.
The Nailer should never be left unattended since
people who are not familiar with the Nailer might
handle it and injure themselves.
24.
KEEP ALERT.
Operate the nailer only in good physical andmental
state.
Do not operate the Nailer when you are tired.
The Nailer should never be used by you if you
are under the influence of alcohol, drugs or
medication that makes you drowsy.
3
25.
HANDLE NAILER CORRECTLY.
Operate the Nailer according to this Manual.
Never allow the Nailer to be operated by children,
individuals unfamiliar wi th its operation or
unauthorized personnel.
26.
NEVER USE NAILER FOR APPLICATIONS
OTHER THAN THOSE SPECIFIED IN THIS
MANUAL.
27.
HANDLE NAILER CAREFULLY.
Do not drop the Nailer or strike the Nailer against
hard surfaces; and do not scratch or engrave
signs on the Nailer. Handle the Nailer carefully.
28.
MAINTAIN NAILER WITH CARE.
Keep the Nailer clean and lubricated for better
and safer performance.
29.
U SE O N L Y PA R T S, A C C ESSOR IES OR
FASTENERS SUPPLIED OR RECOMMENDED
BY DEALER.
Unauthorized parts, accessories, or fasteners
may void your warranty and can leadtomalfunction
and resulting injuries.
Only service personnel trained by dealer,
distributor or employer trained personnel shall
repair the Nailer.
30.
NEVER MODIFY OR ALTER A NAILER.
Doing so may cause it to malfunction and personal
injuries may result.
