Page
29
of
37
Blueprint Lab Confidential Proprietary Information not to be reproduced or made available to third parties without prior consent from
Blueprint Lab and not to be used in any unauthorised way. © Blueprint Lab Pty Ltd 2021
6.1.3 REACH CONTROL
Reach Control will be provided to you digitally via email as well as on a USB within the Hard Carry Case.
1)
Install Reach Control.
2)
Open Reach Control > Settings (Cog Icon) > Ports > Add.
Click the new Port. Name your device. Select UDP as the communication method. Set the:
a.
IP to
192.168.2.3
b.
Port to
6789
c.
Ensure Full-Duplex is selected
