TROUBLESHOOTING
!
!
15
Operating Manual
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
CLT-901
Cordless Caller ID Phone
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BLUEsky
!
!
SYMPTOM SOLUTION
No dial tone
•
Check to see if the handset battery pack is connected inside the
handset battery compartment.
•
Make sure that the adaptor plug is connected to the base unit.
•
Check for the telephone line cord connections. Ensure that both
connectors are plugged securely on the jacks.
•
Test the phone at a different telephone wall jack and listen for a
dial tone.
•
Test a different phone in the wall jack and listen for a dial tone.
Will not ring
•
The phone or another phone connected to the same line may be
in the off-hook (IN USE) position.
•
Try a different phone, if the problem still exists, the fault is not
with the unit.
Static
•
The rechargeable battery pack might be weak. Allow the
rechargeable battery pack to charge fully before using.
•
Try a different phone, if the problem still exists, the fault is not
with the unit.
•
Some atmospheric conditions such as very low humidity can
cause static build-up.
Cannot dial
out
•
Press the TALK button on the handset and listen for a dial tone
before dialing out.
•
Are you in a rotary only area? Set the TONE/PULSE switch to
PULSE.
•
Try a different phone in the jack. If the problem persists, the fault
is not in the unit.
•
Is the phone connected to an answering machine? Disconnect
the answering machine and try to have the phone plugged into
the jack alone. If it works alone, there is a compatibility problem.
Purchase a 2 for 1 adaptor at any phone or electrical supply
store. Plug the 2 for 1 adaptor into the modular wall jack, and
then plug the phone into one side and the answering machine
on the other side of the adaptor.
Memory
feature does
not work
•
Make sure that the unit is in the standby mode before storing a
phone number.
•
The maximum number of digits that you can store for each
memory location is 32 digits. See the “Memory Dialing” section
for more details.
No link
between the
base and
handset
•
You may have taken the handset at a distance away from the
base that is beyond its normal operating range. Refer to the
section of “Operating Range” in the manual for more details.
