4. Wipe clean the chosen area of the windshield with
a dry cloth; it must be completely grease free for
the sticky pad to stick securely. Use detergent or
an alcohol based wipe to remove any grease.
5. Peel the protection film off the 3M adhesive pad
and the protection film off the camera lenses.
6
.
Fix the camera on the selected location; making sure
both camera lenses are vertical before contact
between the adhesive and windscreen. Push the
mount firmly against the glass for 10 seconds for
a good bond, the strength of the bond will increase
over the first few days.
7. Plug the USB charger into the car's 12V DC accessory/
cigarette lighter socket.
18
17