41
42
7. Does Parking mode works with an extra power bank?
No, parking mode cannot work with a power bank.
The dash camera will keep recording in normal mode
until the power bank is empty.
8. Why does this camera not stay connected to my
Android phone?
For some Android phone models (like Google Pixel 2
and SAMSUNG), if the mobile data (LTE) and Wi-Fi
are enabled at the same time, the phone will switch
to mobile data mode automatically since the B2W
Wi-Fi SSID cannot access the internet. This will break
the Wi-Fi connection between the camera and the
smartphone.
For example, SAMSUNG users: go to Settings —
WLAN —Advanced, switch off the "Automatic Data
Switch" option, or simply switch off the mobile data
usage.
If a proxy setting is applied to the Wi-Fi setting, the
connection may also fail. Tap the SSID of the camera
and go to Advanced — Proxy Settings, select "none"
and save the Wi-Fi connection.
Switch off then switch on the Wi-Fi option to try again.
Quit the app (also kill the background process of
the app) and reopen the app.
9. What's the electrostatic sticker for? Does it just goes
on the windscreen and dashcam stick to it?
It sticks to your windshield without using sticky glue,
then the adhesive mount can stick to it, which means
that the mount can subsequently be cleanly removed
from the windshield without leaving any sticky residue.
For a permanent and more secure attachment,you
may also stick the B2W adhesive mount directly to
the windshield. Removal will then require cutting
through the adhesive pad using a thin string/dental
floss and cleaning the residue using a suitable solvent.
1) When the car engine is on, the camera will start to
record normally;
2) When the car engine is turned off, the hardwire kit
will detect that the ACC input is turned off and then
the camera will change to parking mode (Power off)
automatically;
3) When an impact is detected by the G-sensor in
parking mode, the camera starts video recording for
30 seconds automatically and current video clip will
be saved in RO file folder;
4) When the car engine is on again, the camera will
switch to normal mode and start to record normally;
5) When car battery voltage drops lower than 12.4V |
12.2V | 12V | 11.8V ( selected via switch on the
hardwire kit ), then the hardwire kit will cut off power
automatically.
