Bluesocket BlueSecure 1540, Installation Manual

12

Setting the BSAP and Home BSC IP Addresses Using the CLI

To set the BSAP and Home BSC IP addresses using the CLI:

1.

Enter 

1

 at the BSAP CLI main menu command prompt.

The BSAP CLI network configuration menu appears as shown in Figure 6.

2.

Enter 

1

 at the Network Cfg prompt to set the IP address mode.

Enter 1 to set the BSAP IP address mode to 

static

.

3.

Enter 

2

 at the Network Cfg prompt to set the BSAP’s IP address.

Enter the BSAP IP address and subnet mask using the format:

<address> netmask <netmask>

4.

Enter 

3

 at the Network Cfg prompt to specify the BSAP’s default IP gateway.

5.

Enter 

4

 at the Network Cfg prompt to specify the IP address of the BSAP’s 

primary DNS server.

6.

Enter 

5 

at the Network Cfg prompt to specify the BSC mode, i.e. how the 

BSAP is to obtain the IP address of its home BSC.
You can set the BSC mode to either 

Discover

 or 

Static BSC

.

Enter 1 to set the BSC mode to Static BSC.

7.

Enter 

6 

at the Network Cfg prompt to specify the IP address of the BSAP’s 

home BSC.

8.

Enter 

8 

at the Network Cfg prompt to review the BSAP network configuration 

settings you have made.
The network summary includes the MAC addresses of the BSAP’s Ethernet 

and wireless interfaces.

9.

Enter 

p 

at the CLI prompt to return to the main menu.

Figure 6: BSAP CLI Network Configuration Menu