BlueSecure™ Access Point 1840 Installation Guide
12
V.
Wall Mounting the BSAP-1840
Use the white plastic mounting bracket that comes with the BSAP-1840 to install the AP on a
wall or electrical box. To mount the BSAP-1840, follow these steps:
1.
Screw the mounting bracket to the wall or electrical box.
2.
If mounting to drywall, use the four screws and the four wall anchors.
3.
If mounting to a US electrical box, use two threaded screws and insert into the holes
marked “B” in the diagram shown below:
4. Connect the Ethernet cable (for power and network connection) to the port on the back of
the BSAP-1840.
