BlueSecure™ Access Point 1840 Installation Guide
18
4.
Enter the following username and password in lowercase at the displayed CLI login
prompts:
BlueAP login: adm1n (i.e., adm “one” n)
Password: blue1socket (i.e., blue “one” socket).
Navigating the BSAP CLI
The BSAP CLI main menu provides access to these options:
•
Network Configuration - Configure the BSAP’s network settings including its IP address
and the IP address of the BSC to which it will connect.
•
Save/Apply Configuration - After you have configured the BSAP’s network settings, you
must apply them before they become active.
•
Restore Defaults - Restore the BSAP to its default settings.
•
Show Version Information - Display BSAP version information.
•
Reboot AP - After applying the BSAP’s configuration settings, you must reboot the BSAP to
effect the new configuration.
•
Site Survey Configuration - In site survey mode, the BSAP beacons known SSIDs on its
802.11a/n and 802.11 b/g/n radios operating at a configurable power level and channel to
facilitate a WLAN site survey. Rebooting the BSAP following a site survey, restores the
BSAP’s existing configuration. See
