Bluestone HOB-8733, User Manual

19

18

ENGLISH

ENGLISH

c.

 Fix the one-way-valve to the air 

outlet of the cooker hood. Then, 

attached the exhaust pipe onto 

the one-way-valve as shown below

d.

 Chimney installation

b.

 Leave up the cooker hood 

and hang onto the wall 

bracket hook

Put the upper chimney into lower chimney. 

Then pulling out the upper chimney 

upwards. Adjust to reach the height required.

Measure the appropriate height and drill 

2 x 8mm holes to accommodate the plate. 

Screw and tighten the upper wall with 2 

screws provided.

After that, insert carbon filter into the 

machine

Note:

1. Make sure the filter is securely locked. Otherwise, it would loosen and cause 

dangerous.

2. When activated carbon filter attached, the suction power will be lower.

There are 2 methods for installing the chimney cover. Please check the below 

picture for reference

Option 1:

 After drilled the 2 holes and fixed the hook, hang the chimney cover by 

matching the  both side lock. (Picture 1)

Option 2:

  After drilled the 2 holes and fixed the hook, install the chimney cover by 

locking with 2 screws in both side holes (Picture 2) 

e. 

Carbon filter installation

In order to install the activated carbon filter, the grease filter should be 

detached first. Press the lock and pull it downward

(Pic 1)

(Pic 2)

Exhaust pipe