ENGLISH
ENGLISH
The steam control should remain in position Min (= no steam) and turn
the temperature regulating knob to the temperature scale which the
ironed clothes required, the indicator will light on.
Put the iron on the smooth and stable place vertically.
Begin to iron.
When the temperature control knob is set to steam settings between
“ ”to “ ”, vertical steam can be used.
Simply hold the iron vertically, positioned in front with a slight distance
from the item to be steamed, and press the burst steam button.
The Self Clean function helps remove solid residues in water and
scale build-up in the plate. Steam irons need to self-cleaned once
every two weeks.
The anti-calc feature cleans inside the plate, removing impurities.
Special plastic filters inside the water tank soften solid residues in
water and prevent rusting on metal plates.
This plastic filter is fixed and does not need replacing.
Note:
Only use clean water to protect the Anti-Calc system by physical
and chemical changes.
DRY IRON:
VERTICAL SHOT OF STEAM
SELF-CLEANING
ANTI-CALC SYSTEM
SPECIAL FUNCTION FOR STEAM IRON
The iron automatically stops generating steam when the temperature is
too low to prevent water form dripping out of the soleplate.
CLEANING OUTSIDE:
Unplug the iron before cleaning.
Scale on the soleplate can be wiped off with a damp cloth and some
non-scratching (fluid) abrasive.
To keep the soleplate smooth, you should avoid hard contact with
metal objects.
The upper part of the appliance can be cleaned with a damp cloth,
and then wiped over with a dry cloth.
AUTOMATIC ANTI-DRIP FUNCTION
CLEANING
USING SELF-CLEANING FUNCTION
After using the iron for 10-15 days, you should full fill the water tank
with water to “Max” level and set temperature control to “Min” position,
then insert main plug into socket.
Press the “Self Clean” button to start the self-cleaning function.
TO CLEAN
Fill the water tank to the maximum level.
Put the plug in the wall socket.
Select the maximum ironing temperature.
Unplug the iron when the temperature pilot light has gone out.
Press and hold the burst steam button “ “ in 5-10 seconds and
gently shake the iron to and fro.
Repeat the self clean process if the iron still contain a lot of impurities.
25
24
Summary of Contents for SIB-3806
Page 15: ......
