HEX70ED-KIT-V2
USER MANUAL
03
contact
support@blustream.co.uk / support@blustream.com.au
Our 2nd generation range of HDBaseT
™
products offer the very best in
performance and flexibility. The HEX70ED-V2 extender set is an industry
leading 4K HDBaseT
™
solution delivering HDMI with HDCP2.2 support, bi-
directional IR, RS-232 and PoH (PoE) up to lengths of 70m over a single CAT
cable. The HEX70ED-V2 also provides enhanced features including HDMI loop
out on the Transmitter, audio breakout for both stereo analogue and digital
coaxial audio, all within a new thinner form factor casing.
Introduction
FEATURES:
• Advanced HDBaseT technology offering uncompressed video and audio with zero latency
• Extends HDMI up to a distance of 70m over a single CAT cable
• Supports 4K UHD video up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0)
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports 3D signal display
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD
Master Audio transmission
• Features 1x HDMI loop output on Transmitter for integrating local displays or cascading to further signal distribution
devices
• HDMI audio breakout on Transmitter unit to analogue L/R audio and Coaxial digital outputs concurrently
• Advanced EDID management
• Bi-directional RS-232 pass through
• Bi-directional IR pass-through
• Supplied with Blustream IR receiver and emitter
• Supports bi-directional PoH (Power over HDBaseT™) to power extenders from either Transmitter or Receiver end
• HDCP2.2 compliant