EN
>
35
Handling of the e-scooter
E-scooter unfolding
Step 1
> Gently push the handlebars upward and press
the blue pin
> Straighten the handlebars until you hear
the folding mechanism clicks
Notice
Be careful not to damage the opening mechanism
of the e-scooter unnecessarily during handling.
Step 2
> Fasten the safety lock on the blue pin
> Make sure visually that the safety lock has been
fastened completely.
Step 3
> Release the sheath
> Adjust the handlebar height
> Tighten the sheath
Notice
The quick release sleeve on the handlebar should
be adjusted to place resistance on closing, and the
handlebar does not slide down when pushed from
above.
If the sheath is too loose, open it, tighten the nut on
the screw axis and tighten the sheath.
Before each ride, make sure the safety lock is fully
inserted in the central folding mechanism, otherwise
you risk personal injury and damage to the tipping
mechanism itself.
Give your e-scooter a short time to adjust and set all moving parts such as hinges
and brakes in the correct position.
