EN
40
<
E-scooter maintenance
The e-scooter is assembled by professional technicians. Any attempt to disassemble
and repair the e-scooter or its parts separately may damage the electric e-scooter
and void the manufacturer’s warranty upon delivery.
Required tools
Maintenance
Tire change
1. Place the e-scooter on a stable level so that
both wheels are in the air and the e-scooter held
fi rmly on the bottom of the footboard.
2. Unscrew the two rear plastic covers.
3. Remove the cables from the motor (on the right side).
4. Loosen the nuts on the motor axis using key 15–18.
5. Remember the exact arrangement and placement of the washers on each side
of the engine.
Use professional tools to remove the tires from the engine, taking care not to damage
the engine, rim or tire.
6. Carefully remove the wheel from the frame.
7. To easily slip the tire from the rim, you can rub the rim edge with a drop of liquid
soap.
8. Replace the tire with a new one.
9. Put the tire back in place. For easier placement of the tire tube, you can re-use
a drop of liquid soap and moisten the rim edges. Do not use any tools when
fitting the tire, only use your hands.
10. Then follow the previous steps in reverse order.
11. Check that your repair is properly completed and inflate the tire to 4–50 psi
(2.8–3.4 bar).
Toolkit
Pump
