PAGE 7 / 8
Pre-registered numbers feature
This feature allows you to store your 2 favorite numbers in your BLUETREK
®
M2
headset and to dial these numbers directly from your headset.
(Important: This feature is only available in the Hands-free profile).
Storing your favorite numbers
1. Ensure your BLUETREK
®
M2 headset is paired and connected with your phone.
2. Enter numbers following the syntax describe below as your mobile phone name
(Please refer to your mobile number manual to change your phone name. In most
phones, the mobile phone name is under the “Bluetooth” menu.
Example 1: To store “0123456789” in position 1 = 1S0123456789T
Example 2: To store “+44123456789” in position 2 = 2S+44123456789T
3. Press and hold the “Vol – “ button on your BLUETREK
®
M2 headset for approx. 3
seconds until the purple indicator light is on. (A beep can be heard in the speaker).
4. If the number is correct and have stored in the headset, you will hear:
1 beep in the speaker and the blue indicator light will flash once if the number has been
stored in position 1.
OR
2 beeps in the speaker and the blue indicator light will flash twice if the number has
been stored in position 2.
If the number is incorrect, it will not store in the headset. You will head a long low-tone
beep in the speaker and the red indicator light will flash twice.
Note:
-
Only 1 telephone number can be stored at one time. To store the second number,
simply repeat from Step 2.
-
Maximum of 2 favorite numbers can be stored and can be replaced by repeating
the above steps.
-
Remember to change back your mobile phone name once you have stored the
numbers.
