Connect
Assign short name
Set as unauthorised
Delete
Select
Cancel
“0000”
BLUETREK METAL EVO
BLUETREK METAL EVO
“Talk” button
En
gli
sh
4 I BLUETREK METAL EVOLUTION
When the BLUETREK® Metal Evolution is switched off, press and
hold the TALK button for about 5
seconds until the indicator light
flashes red and blue alternately. And a sound can be heard in the
speaker. (If the headset is swith on for the first time, the headset will
go the pairing mode automatically.)
3
If you haven’t started the discovery mode within 5 minutes, the headset will go to the
standby mode. You must then switch off your headset and start the pairing again.
If pairing was successful, the indicator light will switch to blue and flashes slowly.
The headset will connect automatically to the mobile phone.
If the headset is not connected to the mobile phone for 20 minutes, the headset is switched
off automatically.
Once the mobile phone detects the headset, a “BLUETREK METAL” message will be dis-
played. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000,
then press “yes” or “ok”.
For some phones, you may need to select “Connect”.
4
5
BLUETREK METAL EVO
