21
Measure screen page 3
INPUT W
: The real time value of L1, L2 and L3 input power in watt.
INPUT VA
: The real time value of L1, L2 and L3 input power in VA.
INPUT W (%)
: The real time value of L1, L2 and L3 input power watt in percentage.
INPUT VA (%):
The real time value of L1, L2 and L3 input power VA in percentage.
Total W(%)/Total VA(%)
: Total input load watt and VA in percentage.
Input current:
The real-time value of input current in L1, L2 and L3 phases.
Input PF:
The real-time value of input power factor in L1, L2 and L3 phases.
Output current
: The real-time value of output current in L1, L2 and L3 phases.
Output PF
: The real-time value of output power factor in L1, L2 and L3 phases.
3-2-4
Setting screen
This sub-menu is used to set the parameters of UPS. Touch the icon
to enter setting menu page.
There are 2 options: Basic and Advanced. Touch the icon
to return to main screen. Touch the icon
to go back to previous menu.
NOTE
: Not all settings are available in every operation mode. If the setting is not available in present mode,
the LCD will keep its original setting parameter showed instead of changing the parameters.
Setting screen
GENERAL: It’s to set up basic information of the UPS. It’s not related to any function parameter.
ADVANCE: It’s required to enter password to access to the “ADVANCE” setting. There are two types of
authority, User and Maintainer.