37
Advance screen and enter Maintainer password. It will show “UPS SELFTEST” selection in the screen. In the
screen, all tested items are shown “unknown”. Simply click “UPS SELFTEST” button, the UPS will start
self-test. If the UPS is normal, it will show “Normal” in all columns. Otherwise, “Unknown” will be displayed
in the columns.
After the UPS self-test passes, the screen will be black automatically. If the UPS self-test is abnormal, it will
stop on the abnormal screen. At this time, the maintenance personnel should repair the UPS according to
the self-test instructions. Please check local dealer for self-test instructions.
3-2-5
Information screen
Touch the icon
to enter information page. Touch the icon
or
to browse information.
Touch the icon
to return to main screen. Touch the icon
to go back to previous menu.
Basic Information Page
Basic Information
MCU Version
: MCU version.
DSP Version
: DSP version.
Serial NO.
: The serial number of UPS.
Manufacturer
: The information about manufacturer.
Service Contact
: The contact name is set in “Basic Setting”.
Service Phone
: The listed numbers are set in “Basic Setting”.
Service Mail
: The service email account is set in “Basic Setting”.
Basic Information Page 2
PAR State
: The information of parallel status.
