10
2. INSTALLATION INSTRUCTIONS
Attach the two control levers to the footplate attachments on the sides of the main frame.
Main frame - Footplate Attachment- Control Levers - Locking nut M10 (# 8) - M10*15 screws (# 12)
Attach the seat to the main frame.
M8*15 Screw (# 6) - M8 Locknut (# 5)
Attach the front frame to the main frame.
Fastener (# 9)
Place the Hovocart frame on the center of the
Hoverboard.
Loosen the nuts of the rear retaining brackets and adjust
them to the width of the treads (then tighten).
Pull the straps from the opposite side through the eyelets and
secure the Velcro.
The Hovocart is now ready for ride.