background image

 

Blulog TDL2 Data Logger 

16 

  

          

WARNING

 

You can read the temperature by basically placing the 

logger near your device. It is not needed to select 

“Read temperature” beforehand. 

 

 

 

Calibration Certificate 

 

In order to download the calibration certificate, press on the 

“calibration”

 icon on the top right. 

You will find the certificate in the 

“My files”

 app on your 

device inside a 

“Download history”

 or 

“Documents”

 

folder. You can then send it to others or upload it to your 
computer. 

  

          

WARNING

 

Depending on your device model, the app name, like 

“My files” or the folder names, like “Download 

history” may differ. 

 

 

 

 

Blulog products are compliant with relevant 
requirements of EU health, safety and 
environmental protection standards. 

Blulog products are compliant with 
Directive 2002/95/EC, also known as 
RoHS. 

Blulog products must not be disposed of in 
the household trash, but only in 
accordance with local laws and   
regulations. 
 
 
FCC ID: 2AURR-TDL2SERIES 
 
IC: 26476-TDL2SERIES 

 

This device complies with Part 15 of the FCC Rules.  

Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, 
including interference that may cause undesired operation 

This equipment complies with FCC portable radiation 
exposure limits set forth for an occupational/controlled 
environment.

 

This device contains licence-exempt 
transmitter(s)/receiver(s) that comply with Innovation, 
Science and Economic Development Canada's licence-
exempt RSS(s). Operation is subject to the following two 
conditions: 
1.This device may not cause interference. 
2.This device must accept any interference, including 
interference that may cause undesired operation of the 
device. 
 
This equipment complies with ISED radiation exposure limits 
in accordance with RSS-102 Section 2.5.1 
 
C

et appareil contient des émetteurs / récepteurs exempt de 

li

cence qui sont conformes à l'innovation, la science et le 

développement économique RSS (s) sans licence relative à 
Canada. Son fonctionnement est soumis à deux conditions 
suivantes:  
1.Cet appareil ne doit pas provoquer d'interférences.  
2.Cet appareil doit 

accepter toute interférence, y compris les 

interférences susceptibles de provoquer un fonctionnement 
indésirable de l'appareil.  
 
Cet équipement est conforme aux limites d'exposition aux 
rayonnements d'ISDE conformément à la section 2.5.1 de la 
RSS-102

 

No changes shall be made to the equipment without the 
manufacturer’s permission as this may void the user’s 
authority to operate the equipment 

Safe Drinking Water and Toxic Enforcement Act of 1986 
(

California Proposition 65) Warning label: 

 

 

 

Our 

“WARNING”

 notices are mandated by California 

Proposition 65. We believe that our products are 
completely safe for consumer use and if any Prop 65 listed 
chemicals were to be present, we believe 

Summary of Contents for TDL2




















Reviews: