background image

 

Blulog TDL2 Data Logger 

17 

they would be within the safe harbor levels for exposure as 
published by Prop 65. 
 
Our products use Acrylonitrile Butadiene Styrene (ABS) 
plastic for enclosures, and Styrene is a 
precursor chemical used to make ABS plastic. Prop 65 
identifies Styrene as a chemical that can cause cancer. 
Please note that PC and ABS plastics are not listed polymers 
under Prop 65, but the identified precursor 
chemicals are listed and in some cases these finished 
plastics may contain low levels of the chemical in 
the plastic. Therefore, out of an abundance of caution we 
decide to adopt this marking to alleviate any 
legal issues that could arise from an improperly marked 
product sold in California. These warnings are 
not required by FDA or other Federal agencies. 
 

 

Limited Warranty

 

 

Blulog Incorporated Limited Warranty Policy for TDL2 
RF Data Logger  device. 

This product is sold subject to the Blulog Incorporated 
Limited Warranty Policy available with this product.  

IMPORTANT: BY USING YOUR TDL2 DATA 
LOGGER  YOU ARE AGREEING TO BE BOUND 
BY THE TERMS OF THE BLULOG TDL2 DATA 
LOGGER  WARRANT

Y (“WARRANTY”) AS SET 

OUT BELOW 

DO NOT USE YOUR PRODUCT UNTIL YOU HAVE 
READ THE TERMS OF THE WARRANTY.  

DURATION 

Hardware 

3 years Limited Warranty  

 
HOW CONSUMER LAW RELATES TO THIS 
WARRANTY 

This warranty gives you, the customer, specific legal 
rights from Blulog - the manufacturer. In addition, you 
may also have other legal rights under applicable 
local law or special written agreement with Blulog. For 
a full understanding of your rights you should consult 
the laws of your country. 

WARRANTY LIMITATIONS SUBJECT TO CONSUMER 
LAW 

To the extent permitted by law, this warranty and the 
remedies set forth are exclusive and in lieu of all other 
warranties, remedies and conditions, whether oral, written, 
statutory, express or implied. Blulog disclaims all statutory 
and implied warranties, including without limitation, 
warranties of merchantability and fitness for a particular 
purpose and warranties against hidden or latent defects, to 
the extent permitted by law. In so far as such warranties 
cannot be disclaimed, Blulog limits the duration and 
remedies of such warranties to the duration of this express 
warranty and, at Blulog's option, the repair or replacement 
services described below. Some countries do not allow 
limitations on how long an implied warranty (or condition) 
may last, so the limitation described above may not apply to 
you. 

WHAT IS COVERED BY THIS WARRANTY? 

Blulog Sp. z o.o., Konarzewska 4, 60-

101, Poznań („Blulog”) 

warrants the Blulog TDL2 Data Logger  product against 
defects in materials and workmanship when used normally in 
accordance with Blulog's published guidelines for a period of 
ONE (3) YEARS from the date of original purchase by the 
end-

user purchaser ("Warranty Period"). Blulog’s published 

guidelines include but are not limited to information 
contained in technical specifications, user manuals and 
service communications. 

WHAT IS NOT COVERED BY THIS WARRANTY? 

This Warranty does not apply to any non-Blulog branded 
hardware products or any software, even if packaged or sold 
with Blulog hardware. Manufacturers, suppliers, or 
publishers, other than Blulog, may provide their own 
warranties to you 

– please contact them for further 

information. Software distributed by Blulog with or without the 
Blulog brand (including, but not limited to system software) is 
not covered by this Warranty. Please refer to the licensing 
agreement accompanying the software for details of your 
rights with respect to its use. Blulog does not warrant that the 
operation of the Blulog Product will be uninterrupted or error-
free. Blulog is not responsible for damage arising from failure 
to 

follow instructions relating to the Blulog Product’s use. 

This Warranty does not apply: (a) to consumable parts, such 
as protective coatings that are designed to diminish over 
time, unless failure has occurred due to a defect in materials 
or workmanship; (b) to cosmetic damage, including but not 
limited to scratches, dents and broken plastic on ports 
unless failure has occurred due to a defect in materials or 
workmanship; (c) to damage caused by use with a third party 
component or product that does not meet the Blulog 
Product’s specifications; (d) to damage caused by accident, 
abuse, misuse, fire, liquid contact, earthquake or other 
external cause; (e) to damage caused by operating the 
Blulog Product outside Blulog’s published guidelines; (f) to 
damage caused by service (including upgrades and 
expansions) performed by anyone who is not a 
representative of Blulog or an Blulog Distributor; (g) to an 
Blulog Product that has been modified to alter functionality 
or capability without the written permission of Blulog; (h) to 
defects caused by normal wear and tear or otherwise due to 
the normal aging of the Blulog Product; (i) if any serial 
number has been removed or defaced from the Blulog 
Product; or (j) if Blulog receives information from relevant 
public authorities that the product has been stolen or if you 
deactivated other security measures designed to prevent 
unauthorized access to the Blulog Product, and you cannot 
prove in any way that you are the authorized user of the 
product (e.g. by presenting proof of purchase). 

IMPORTANT RESTRICTION BLULOG TDL2 DATA LOGGER  
PRODUCT. 

Blulog may restrict warranty service for TDL2 Data Logger  
Product to the country where Blulog or its Authorized Distributor 
originally sold the device. 

YOUR RESPONSIBILITIES 

You should make periodic backup copies of the information to 
protect the contents and as a precaution against possible 
operational failures.  

Summary of Contents for TDL2




















Reviews: