Service
[ S ] 33
Change of filter (annually or if required)
1.
Pull your freeAir100 gently with both hands at the same
time left and right at the center of the panel from the wall
box and set it onto the flour.
Note
When removing the freeAir100 from the wall box it is
possible that some remaining condensate water will flow
from the heat exchanger.
2.
Push the two metal flaps apart and remove the dirty
supply filter.
Please only use original bluMartin- filters.
Note
For allergy sufferers are also filter class F7 available
(increased air resistance
some more noise).
3.
Pull the extract filter out of the side of the device and
replace with original bluMartin-filter.