-6-
-5-
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the
phone to another Bluetooth device), do one of the following:
Switch off the headset.
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the
connection in the Bluetooth menu of your phone, or press and hold the
answer/end key.
You can set your phone to connect with the headset automatically when
the headset is switched on. See the user guide of your phone for details.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
Ensure that the headset is charged, switched on, paired with and connected to
your phone.
Ensure that the Bluetooth feature is activated on your phone.
Check that the headset is within 10 meter (30 feet) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.
Switch the headset on or off
To switch on, press and hold the power key for 3 seconds. The blue
indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until headset
beeps 2 times and the red indicator light is displayed briefly.
Pair the headset with a compatible phone
1. make sure your headset is turn off.
2. push the answer key for 8 second until the blue and red light flashes
alternately.
3. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone for
instructions.
4. Select the headset (ET-08) from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your phone.
In some phones you may need to make the connection separately after
pairing. See the user guide of your phone for details. You only need to
pair the headset with your phone once.
6. If the pairing is successful, the headsets blue light will flash 3 times
briefly for the first time follow by a single flash every 7 seconds. The
headsets name appears in the phone menu where you can view the
currently paired Bluetooth devices.
ENGLISH
All manuals and user guides at all-guides.com
