ASSEMBLY INSTURCTIONS for e-KLAVIER 1
ATTENTION!
Please assemble the piano on a level floor.
All parts must be assembled in the correct order.
Use only the original parts (screws, brackets, etc.)
Using the wrong parts or screws can cause damage to the Blüthner e-Klavier 1.
For optimal setup, two people are required to assemble to Blüthner e-Klavier 1.
It is recommended that you ensure all the assembly parts are accounted for and
prepared in their proper quantity, as listed below, before beginning the assembly
process.
WARNING!
Please read the attached installation and assembly instructions carefully, which
describes the precise assembly of the instrument. Failure to observe the instructions in
the installation chapter of this manual may cause damage or even injury.
LIST OF ASSEMBLY PARTS:
4 - wooden dowels 6 x 35 mm (Part No. SPN 01627)
2 - countersunk screws 5 x 70 mm (Part No. SPN 210175070)
4 - wooden dowels 8 x 30 mm (Part No. SPN 01631)
4 - socket head screws M6 x 50 mm (Part No. 00656 - black; 00657 - white)
6 - countersunk screws 4 x 30 mm (Part No. VIT 00587 - black; VIT 00588 - white)
6 - round head screws 3,9 x 13,5 mm (Part No. 250990018 - black; 250990017 - white)
4 - countersunk screws M4 x 20 mm (Part No. VIT 00586 - black; VIT 00535 - white)
8 - socket head screws M6 x 50 mm (Part No. VIT 00656 - black; VIT 00657 - white)
2 - metal corner brackets (Part No. STF00200 - black; STF00201 - white)
1 - allen wrench (Part. No. 394000142)
Page 20
lüthner
e
-
K
lavier 1
1
Assembly Instructions