Configuration
Connect the Blutronics Bludrive II CCID smart card reader to a free USB port on your computer.
The computer will detect the presence of the new device and will automatically configure it without you having to install any drivers.
In the event that the computer in use is equipped with a MAC OSX operating system lower than version 10.11.2 it may be necessary to
use our Blutronics Diagnostic Tool to make the smart card reader correctly visible.
Operation
When the smart card reader is correctly configured, the LED on the reader will turn on steady green color.
When a smartcard is inserted, the color of the LED will change to red and will blink when the computer communicates with the smart
card.
Check if it is installed correctly
To verify the correct functioning of the Blutronics Bludrive II CCID smart card reader, a free application is available that can be
downloaded from the support section accessible from our website
blutronics.com
The application is easy to use and you just need to install it, insert a valid smart card in the reader and start the test.
To facilitate this operation, demonstration videos are also available with different operating systems such as Windows, Mac, Linux.
How to use it
A smartcard reader is a peripheral that allows the reading and writing of ISO7816 standard contact smart cards.
Therefore, in order to read or write a smart card, specific application software is required for the type of operation to be carried out.
There are application software that must be installed on the local computer, such as software for digitally signing documents, and there
are application software that can be used through the internet browser.
In both cases it is necessary that the smart card supplier provides the indications for its use and therefore whether to download an
application, or to access online providing all the instructions.
Technical support
Technical support for Blutronics products is free and can be requested by accessing our website blutronics.com and selecting technical
support and then consulting the frequently asked questions or opening a support request ticket to our technical staff.
European Declaration of Conformity
Blutronics hereby declares that the device complies with the essential requirements and other relevant provisions of the 89/336/CEE,
92/31/CEE, 93/68/CEE directives.
The original EU declaration of conformity is available at blutronics.com
Safety information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair or modify the device.
If you need assistance, please contact us.
English
