F2 Full Face Mask User Manual V2.1
9
/
14
E
n
g
lis
h
Weekly
Hand wash the headgear and all components in warm (approx. 30°C)
and soapy water. Use pure soap. Rinse the components well and
allow them to air dry out of direct sunlight.
Reprocessing the Mask between Patients
This mask should be reprocessed when used between patients.
Cleaning and disinfection instructions are available from the BMC
website, www.bmc-medical.com. If you do not have internet access,
please contact your BMC representative.
Reassembling the Mask
1
2
3
Install the forehead
pad onto the
upper-half installation
groove of the mask
frame.
Install the cushion
onto the lower-half
installation groove of
the mask frame and
confirm the proper
engagement
between the silicone
gel pad and the
installation groove.
Install the upper-half
headgear onto the
upper-half installation
hole of the mask frame.
