USB-AD
Data Acquisition System (USB)
Functional diagram
Measurement & Control.
Quite Simple.
Record and output signals with the USB-AD: The
USB data acquisition system is ideal for universal
applications and due to the small size perfectly
suitable for mobile use - just plug in and get
going!
Extra Small. Extra Red.
Extra Low-Priced.
The unique idea of the USB-AD: the data
acquisition system is accomodated in the D-Sub
connector housing. Not only the size is extra
small but also the price.
16 AIn. 1 AOut. 12 Bit.
±
5V.
Voltages in the ±5V range are connected at 16
analog inputs. Sampling is done with 12 bit reso-
lution and 10Hz per channel.The ±5V output can
be used for analog control with 12 bit accuracy.
4 DIn/DOut Each. 1 Counter.
Digital states are recorded or controlled at four
digital inputs and outputs each. Digital inputs are
sampled time-synchronously with the analog
inputs.
Plug & Play.
The connection to the PC is realized via USB.
The USB-AD provides all typical USB features
(e.g. Plug&Play, Hot-Plug). Up to 127 devices
can be connected and installed during operation.
Powered by USB.
The device is supplied with power via the USB
interface. This reduces cabling efforts to a
minimum and makes mobile measurements a lot
easier.
Open for Everyone.
Widely supported: The data acquisition system
can be used under Windows
®
XP/7/8 as well as
under Mac OS X, Free BSD, and Linux. The
complete software for installation and program-
ming of the USB-AD is included for free.
NextView
®
4. Try for Free.
The DAQ system is supported by NextView
®
4,
the software for data acquisition and analysis. A
fully functional 30-day trial is included with
delivery to directly test the functionality of the
USB-AD.
Accessory.
Makes everything so easy.
Use the demo board ZU-DBD featuring various
operating controls and sensors to generate 16
analog signals and record them with the USB data
acquisition system.
Via Paolo Uccello 4 - 20148 Milano
Tel +39 02 48 009 757 Fax +39 02 48 002 070 info@dspmindustria.it www.dspmindustria.it
