14
6 Using Your Phone
6.1 Powering on/off
Press and hold
the Red key
to switch your phone on or off.
1. If there is no SIM card, SIM card is defective, or SIM card contact is loose,
you will be prompted with a warning after powering on, Shut down and check
your SIM and its installation.
2. If inserted one GSM SIM card only into the phone, meanwhile phone code
and PIN code is turned on. When switched on, after entering the PIN code and
phone code, the phone enter the standby mode by the current SIM.
3. If inserted two GSM SIM cards, meanwhile phone code, PIN1 code and PIN2
code are all turned on. When switched on, you will be prompted to enter the
code one by one.
After switched on, the phone will automatically search the network.
If the phone detected authorized network, the screen will display the
network name and signal strength
;
If no authorized network is found
the
phone can only make emergency calls or use non-communications features.
6.2 Making a Call
6.2.1
Making a domestic call
In standby mode, press the corresponding numeric keys to enter the phone
number, in idle mode to you want to dial, including necessary area codes. press
the Right soft key
to delete erroneous inputs; press
the Left soft key
or press
the Green key
to make a call when done to connect.
6.2.2 Dialing Fixed/Land Line Extensions