…when it comes to quality!
BMR GmbH
3
3.
Safety-Precautions and Warnings
This device produces dangerous electrical voltages and is used for the operation of fast
spinning tools. Because of their high rotational speed, it may be dangerous in case of
improper handling. For this reason, only professionally trained and qualified personnel
should be allowed to work with and setup this device!
Before the first commissioning can be carried out, it should be ensured that the spindle and
the tool are fixed properly, to eliminate all dangers because of uncontrolled movement of
the spindle.
Safety regulations being valid for the country where the device is used, have to be adhered
to where any work is carried out on the device.
Before the device is turned on for the first time, it should be verified, that the connected
parts cannot carry out uncontrolled movements.
The frequency converter must not be operated close to heating devices or magnets or
devices generating strong magnetic fields.
Sufficient air circulation around the converter should be ensured.
Fluids should be prevented from intruding into the housing. If it seems to be happened, the
converter has to be switched off immediately.
The ambient air must not use aggressive, flammable or electrically conductive substances
and should be as free of dust as possible.
All repairs and maintenance on the converter and the relating accessories must be carried
out by skilled personal and with powered off, only. To ensure this, the mains plug should be
pulled out. In doing this, both the terms of regulations for preventing accidents and the
general and national rules for mounting and safety have to be applied.
Do not open this device while it is connected to power supply. There is danger of life!
With opening this unit the period of warranty will be ended.
All people who work with this device should be trained and instructed by their line advanced
technician.
Attention:
Please ensure to have the proper characteristic selected, always!
The operation of a spindle with a wrong characteristic may harm the
spindle severely!
Attention:
In case of replacing the fuses, please ensure to use types only, which are
mentioned in ‘Technical Data’!
Attention:
Please verify that all power supply voltages are correct in polarity and value
