Maintenance
10
Safety instructions for maintenance and servicing 10.3
139
WARNING
Risk of injury from unauthorized restarting.
Persons can be injured through an unexpected start-up of the energy
supply while working on individual components.
−
Before carrying out any work on individual components, ensure that
the power supply is switched off and secured against being switched
on again.
WARNING
Risk of injury due to hazardous materials.
Hazardous substances contain components that are hazardous to health
and can lead to poisoning, chemical burns or skin irritations.
−
Observe the manufacturer’s safety data sheet.
−
Avoid spilling and fog formation.
−
Do not eat, drink or smoke near the machine.
−
Avoid skin and eye contact.
WARNING
Risk of injury from the high-pressure system on the motor
There is a risk of injury from improper disassembly or improper repair of
the high pressure machine for the fuel and the fuel lines. The motor can
also be damaged.
−
Maintenance work on the motor, in particular on the fuel lines and the
high-pressure system for the fuel, must be carried out only by trained
specialist personnel authorised by the operator.
−
Wear personal protective equipment.
Summary of Contents for alpha CR
