Maintenance
10
Maintenance schedules 10.5
143
Personne
l
Interval
Maintenance
Comment
Before driving,
weekly
Check parallel
adjustment of the
overrun device for
play and ease of
movement.
Visual inspection of the parallel adjustment of
the overrun device. Grease it if necessary in
the event of sluggishness.
If this is not remedied, contact a specialist
workshop.
Before driving,
weekly
Check the function of
the parking brake.
Carry out a driving test by moving off with the
parking brake applied.
In case of malfunction, contact a specialist
workshop.
Before driving,
weekly
Check the function of
the overrun brake.
Carry out a driving test.
In case of malfunction, contact a specialist
workshop.
Before driving,
weekly
Check breakaway
cable guide and
function of the tear
rope.
Check breakaway cable for damage. Replace a
damaged breakaway cable.
In case of malfunction, contact a specialist
workshop.
Before driving,
weekly
Check function and
locking of the support
wheel.
Check support wheel for damage. Replace a
damaged support wheel.
In case of malfunction, contact a specialist
workshop
Before driving,
weekly
Check function and
tightness of the
towing eye or ball
coupling.
If the coupling or ball head of the towing vehicle
is damaged, contact a specialist workshop.
Every 1000 km or
monthly
Grease the lubrication
points of the
overrunning brake
device.
Lubricate all lubrication points with a grease
gun.
Every 3 months
Check screws of the
following components
for tightness:
−
Overrun device,
−
Frame
−
Chassis
Observe the tightening torques for the
individual screw connections.
Every 3 months
Check the function of
the overrun braking
device.
Check the function of the overrun braking
machine on a brake test bench in a specialist
workshop and, if necessary, readjust or have
defective parts replaced.
Every 3 months
Check shock
absorber for oil loss.
Check the shock absorber on a brake tester in
a specialist workshop and readjust if necessary
or have defective parts replaced.
Summary of Contents for alpha CR
