6
Driving operation
6.7
Uncoupling and parking
78
10. Release the plug connection for the rear light unit. Pull the plug out of
the socket (9).
11. Pull the two spring cotter pins (10) out of the bolts.
12. Lift the rear light unit with number plate out of the bolts on the mixing
and delivery vessel.
13. Install the rear light unit on the coupling.
Figure 37: Removing the rear light unit
Parking in public places
If you park the trailer with or without a towing vehicle in public places, the
rear light unit must be fitted correctly.
Figure 38: Parking in public places
1.
Mount the rear light unit with number plate by placing it on the bolts (1)
on the mixing and delivery vessel and secure it with the locking springs
(2).
2.
Insert the plug of the rear light unit into the socket (3) underneath the
levers for the delivery of the upper and lower air. Make sure that the
plug is secured by the socket flap.
Summary of Contents for alpha CR
