2
Safety
2.1
General information
16
2
Safety
2.1
General information
This section provides an overview of important safety aspects for the
protection of the operator and personnel against possible hazards and the
safe and failure-free flow of operation.
Failure to observe the listed directives, warnings, and safety instructions can
result in considerable hazards.
2.2
Intended use
The
BMS
alpha
CR
is a screed machine used for the production and transport
of building materials. Only the materials listed below may be mixed and
transported with the machine:
−
Screed up to a grain diameter of 16 mm.
−
Other materials are permitted only in consultation with and with the
written approval of the manufacturer.
The machine must not be operated in closed rooms due to the exhaust
gases produced.
The compressed air connection may only be used to convey material to the
machine. Any other use is only permitted after consultation with and with the
written consent of the manufacturer.
2.3
Improper use
Any use of the add-
on device other than the one described in “intended use”
is deemed to be inappropriate use. The operator is solely liable for any
resulting damage.
Summary of Contents for alpha CR
