Follow the Instruction Below
1. Purpose
This microscope is only applied for microscopy observation, not for others.
2. Never disassemble
Disassembly may cause electrical shocks and/or severe damage to the instrument. Never
disassemble any part than that mentioned on this manual. If you notice any malfunction,
contact your nearest representative. Fungicide is used in the eyepiece tube, eyepieces
and objectives. If you should disassemble them and touch the parts inside, you may get a
rash with the fungicide
3. Heat at the Light Source
The light bulb and the lamp housing will be very hot after long hour working. Never touch
them by hands until they cool down, otherwise your hands will be hurt.
4. Power supply
Pay attention to the specifications of power supply, which marked on the microscope base.
The power supply must comply with the specifications; otherwise the microscope will be
damaged.
5. Changing the Light bulb
Before replacing the light bulb with new one, first turn off the light switch on the
microscope base, then take off the power plug and wait until the bulb cools down. Only
halogen bulb 6V/20W is workable on this microscope, never use other bulbs.
6. Storage
1) Before moving the microscope, turn off the light switch and take off the power plug.
2) Usually, following environment is required: lndoor temperature: 0 degree ~40
degree
Max relative humidity: 85%
3) After use, cover the microscope with the dust-cover provided, and store it in a dry and
clean place free from moisture to prevent rust.
7. Handle Gently
Microscope is a precision instrument. Handle it gently. Strong shocks and forcible
operations will cause severe damage to the instrument.
Summary of Contents for C2
Page 2: ...OVERVIEW ...
