Steering Inspection
Periodically inspect the condition of the steering.
Worn out or loose steering bearings may be danger-
ous. Place a stand under the engine to raise the front
wheel off the ground. Hold the lower end of the front
forks and try to move them forward and backward. If
any free play can be felt, ask a dealer to inspect and
adjust the steering. Inspection is easier if the front
wheel is removed.
NOTE:
*Securely support the scooter so there is no danger
of it falling over.
Wheel Bearings
If there is play in the front or rear wheel hub or if the wheel
does not turn smoothly, have a dealer inspect the wheel
bearings.
PERIODIC MAINTENANCE AND REPAIR
Fuse Box
Fuse Replacement
If the fuse is blown, turn off the main switch and the switch of the circuit in
question. Remove the screws on battery case cover. The fuse is at the side
of the case. Install a new fuse of specified amperage. Make sure the new
fuse is fitted securely. Turn on the switches and see if the electrical device
operates.
Specified Fuse: 15A
NOTE:
*Do not use fuses of higher amperage rating than those specified.
Substitution of fuse of improper rating can cause extensive electrical
system damage and possibly a fire.
-30-
-31-
ELECTRIC CIRCUIT DIAGRAM
-32-
MAJOR TECHNICAL PARAMETERS
2060×700×1125 mm
1440 mm
150mm
119kg
150kg
80km/h
130/60-13
130/60-13
CDI
A7RTC
12V9A
Engine description
Engine displacement 125CC
Engine displacement 125CC
Cylinder capacity
Maximum net power output
Net maximum work rate
Net maximum torque
Maximum capacity
Brand of fuel oil
Recommended motor oil
Volume of lubricating oil
124.6 cm3
9.2:1
1700 100r/min
5.7kw/700r/min
8.0N.m/5500r/min
6.4L
SAE 10W/40 SF
