manualshive.com logo in svg

BMW BMW M2 COMPETITION, Owner'S Manual

The BMW M2 Competition is a thrilling sports car, and you can get the most out of its performance by referring to the comprehensive Owner's Manual. Unlock the full potential of your BMW with this essential manual, available for free download at 88.208.23.73:8080. Enhance your driving experience with the ultimate guide.

Share
Download
background image

Synchronizing the universal remote control with
the system:

1.

Park the vehicle within range of the remote-
controlled system.

2.

Program the desired button on the interior
mirror as described.

3.

Locate and press the synchronizing button
on the system being programmed, e.g. at the
garage gate. You have approx. 30 seconds
for the next step.

4.

Hold down the programmed button on the in‐
terior mirror for approximately 3 seconds and
then release it. If necessary, repeat this step
up to three times in order to finish synchroni‐
zation. Once synchronization is complete, the
programmed function will be carried out.

Reprogramming individual

buttons

1.

Switch on the ignition.

2.

Press and hold the interior mirror button to be
programmed.

3.

As soon as the LED on the interior mirror
flashes orange after approx. 20 seconds, re‐
lease the button.

4.

Hold the hand-held transmitter for the system
to be used approx. 1 to 12 in/2.5 to 30 cm
away from the buttons on the interior mirror.
The required distance depends on the hand-
held transmitter.

5.

Press and hold the button of the desired
function on the hand-held transmitter.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the in‐
terior mirror button and repeatedly press and
release the hand-held transmitter button for
2 seconds.

6.

The LED can light up in different ways.

▷

The LED lights up green: the program‐
ming procedure is completed.
Release the button.

▷

The LED flashes fast: the hand-held
transmitter was detected but program‐
ming is not complete.
Press the button on the interior mirror for
2 seconds and release. Perform this pro‐
cedure three times to complete the pro‐
gramming procedure.
If the integrated universal remote control
remains nonoperational, continue with the
special features for change code wireless
systems.

▷

LED does not flash green after 60 sec‐
onds: programming not completed.
Repeat steps 3 to 6.

If the programming procedure is not completed,
the previous programming will remain un‐
changed.

Operation

Warning

The operation of remote-controlled systems
with the integrated universal remote control,
such as the garage door, may result in injury,
for example, body parts becoming jammed in a
garage door. There is a risk of injury or risk of
damage to property. Make sure that the area of
movement of the respective system is clear
during programming and operation. Also follow
the safety information of the hand-held trans‐
mitter.

The system, such as the garage door, can be op‐
erated using the button on the interior mirror
while the engine is running or when the ignition
is started. To do this, hold down the button
within receiving range of the system until the
function is activated. The interior mirror LED
stays lit while the wireless signal is being trans‐
mitted.

Deleting stored functions

All stored functions will be deleted. The func‐
tions cannot be deleted individually.

Seite 183

Interior equipment

CONTROLS

183

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews:

No comments

Related manuals for BMW M2 COMPETITION

Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
PEUGEOT Partner Origin Handbook preview
Partner Origin
Brand: PEUGEOT Pages: 128
Schumacher Electric SPI6 Owner'S Manual preview
SPI6
Brand: Schumacher Electric Pages: 87
Cadillac 2009 ESCALADE ESV Owner'S Manual preview
2009 ESCALADE ESV
Brand: Cadillac Pages: 602
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Yakima RoadShower 10G Quick Start Manual preview
RoadShower 10G
Brand: Yakima Pages: 12
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5

Brands by name

Popular brands

Load more brands