background image

Switching on

With radio-ready state switched off, press the
lever either up or down past the resistance point.

Switching off

Press the lever back into the standard position.

Welcome lights and

headlight courtesy delay

feature

Welcome lights

General information

Depending on the vehicle equipment and the
ambient brightness, individual light functions may
be switched on briefly when the vehicle is un‐
locked.

Activating/deactivating

Position of switch:  

  ,    

Via iDrive:

1.

"My Vehicle"

2.

"Vehicle settings"

3.

"Lighting"

4.

"Exterior lighting"

5.

"Welcome lights"

The setting is stored for the driver profile cur‐
rently used.

Headlight courtesy delay feature

General information

The low beams stay illuminated for a particular
time if the high beams are switched on after
radio-ready state is switched off.

Setting the duration

Via iDrive:

1.

"My Vehicle"

2.

"Vehicle settings"

3.

"Lighting"

4.

"Exterior lighting"

5.

"Pathway lighting"

6.

Set length of time.

The setting is stored for the driver profile cur‐
rently used.

Automatic headlight

control

Concept

The low beams are switched on and off automat‐
ically depending on the ambient brightness, for
example in tunnels, in twilight or if there is pre‐
cipitation.

General information

A blue sky with the sun low on the horizon can
cause the lights to be switched on.
When emerging from a tunnel during the day, the
low beams are not switched off immediately but
instead only after approx. 2 minutes.

Activating

Position of switch:    
The indicator light in the instrument cluster is il‐
luminated when the low beams are switched on.

Seite 134

CONTROLS

Lights

134

Online Edition for Part no. 01402720665 - II/19

Summary of Contents for BMW M2 COMPETITION























































































































































































































































































Reviews: