Infotainment�2018
6.�Audio�Systems
52
Connections�for�Receiver�Audio�Module�high
Index
Explanation
1
Main�connector�(power�supply,�K-CAN4,
NF�connection�for�mid-range�speaker)
2
Ethernet�connection
3
AM/FM�aerials
4
SDARS�aerial
The�RAM�high�replaces�the�Active�Sound�Design�(ASD).�If�equipped,�the�speaker�for�the�outside
sound�is�activated�by�the�RAM.
6.3.�Booster
6.3.1.�Function
The�previous�audio�amplifiers�are�replaced�with�a�new�control�unit,�the�
Booster
�(in�different�versions).
The�Booster�is�
also
�installed�for�the�Receiver�Audio�Module�(RAM)�depending�on�the�equipment.�The
Booster�is�connected�to�the�RAM�via�an�Ethernet�line.
The�Booster�is�installed�in�the�vehicle�if�at�least�one�of�the�following�optional�equipment�is�present:
•
Harman�Kardon�Surround�Sound�System�(SA�688)
•
Bowers�&�Wilkins�Diamond�Surround�Sound�System�(SA�6F1)�(available�from�December
2018)