background image

Turn signal in exterior mirror

The turn signals in the exterior mirrors feature
LED technology. Contact a dealer’s service
center or another qualified service center or re‐
pair shop in the event of a malfunction.

Tail lights, bulb replacement

Vehicles with halogen headlights

Side marker lights
Turn signal
Reversing lamp
Inside brake lamp
Tail lights
Brake lights/tail lights

Vehicles with LED headlights

Turn signal
Reversing lamp
Inside brake lamp
Tail lights
Brake light

The tail lights feature LED technology. Contact
a dealer’s service center or another qualified
service center or repair shop in the event of a
malfunction.

Bulb replacement, exterior tail lights

General information

Follow general instructions, refer to page 

206

.

Turn signal: 21-watt bulb, P21WLL.
Outer brake lamp: 21 watt bulb, P21WLL.

Removing the exterior tail lamp

1.

Open the tailgate.

2.

Remove the fastening using the screw
driver from the onboard vehicle tool kit, ar‐
row 1.
Remove cover, arrow 2.

3.

Loosen both nuts, arrow 1, of the outer tail
lamp.
Carefully pull out the tail lights toward the
front, arrow 2, from the body. Ensure that
the wiring is not damaged.

4.

Pull the plug out of the bulb holder and
have the tail lamp wiring hang outside.

Seite 211

Replacing components

Mobility

211

Online Edition for Part no. 01 40 2 964 303 - VI/15

Summary of Contents for X1 2015



















































































































































































































































Reviews: