BN Products BNR1839, Operating Instructions Manual

 Page | 4

TECHNICAL SPECIFICATIONS

Model Number

BNR1839

Voltage

120V

~

, 60Hz

Power

5A, 600W

Round Rotation Speed

600-1500 rpm  

Triangle  Orbital  Speed                  3000-6000 rpm             
Round Sanding Pad.ø

9” (225mm)

Triangle Sanding Pad

8.5” (215mm)

Protection class

Class II 
Double Insulated

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING!

 Read all safety warnings and all instructions. 

Failure to follow the warnings and instructions may result 
in electric shock, fire and/or serious injury. Save all these 
instructions for future reference. The term “power tool” in 
the warnings refers to your (corded) power tool.

1. WORK AREA SAFETY

•  Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

•  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 
dust. Power tools create sparks which may ignite the 
dust or fumes.

•  Keep children and bystanders away while operating a 

power tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

•  Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 
earthed (grounded) power tools.Unmodified plugs and 
matching outlets will reduce risk of electric shock.

•  Avoid body contact grounded surfaces such as pipes, 

radiators, ranges and refrigerators. There is an in-
creased risk of electric shock if your body is grounded.

•  Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 
electric shock.

•  Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges or moving parts. Damaged 
or entangled cords increase the risk of electric shock.

•  When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.

3. PERSONAL SAFETY

•  Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use a 

power tool while you are tired or under the influence 
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious 
personal injury.

•  Use personal protective equipment. Always wear eye 

protection. Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal 
injuries.

•  Prevent unintentional starting. Ensure the switch is 

in the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 
Carrying power tools with your finger on the switch or 
energising power tools that have the switch on invites 
accidents.

•  Remove any adjusting key or wrench before turning 

the power tool on. A wrench or a key left attached to a 
rotating part of the power tool may result in personal 
injury.

•  Do not overreach. Keep proper footing and balance at 

all times. This enables better control of the power tool 
in unexpected situations.

•  Dress properly. Do not wear loose clothing or jewelry. 

Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewelry or long hair can be 
caught in moving parts.

•  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 
connected and properly used. Use of dust collection 
can reduce dust-related hazards.

4. POWER TOOL USE AND CARE

•  Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 
do the job better and safer at the rate for which it was 
designed.

•  Do not use the power tool if the switch does not turn 

it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk 
of starting the power tool accidentally.

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool. Power 
tools are dangerous in the hands of untrained users.

•  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s opera-
tion. If damaged, have the power tool repaired before 
use. Many accidents are caused by poorly maintained 
power tools.