USER MANUAL ~ DRYWALL SANDER MODEL No. BNR7231A
- Page 7-
Fig .1-1 Fig1-2 Fig.1-3
Fit the screw to the groove; Lock on by fastening block; Finish installation;
Strip the machine by the opposite actions.
NOTE: If find the fastening block too tight or to loose to lock the handle, please
adjust the fitting screw to be looser or tighter by hand!
-stick the sanding paper to the pad (Fig.2)
Fig2
Ensure the holes on the sanding paper to fit the holes on the pad accuracy.
-Medium length installation
Loose the screw nut (Fig. 3-1) by anti-clockwise turning and extend the length.
Fig.3-1
Then fasten the screw nut by clockwise turning (Fig.3-2).
Fig.3-2
Go back to the non-extended status by opposite actions.
The longest length installation
Insert the additional handle to the end of the machine.