14
Warranty & Maintenance
An one year warranty is included when you purchase a new
STICKu. In case of any dispute, the company reserves the right of
final decision.
The customer shall NOT have any claim under this warranty for
repair or adjustment expenses if:
-
The problem is caused by improper repair or adjustment
made by anyone other than BNET-TECH
-
The problem is caused by improper, rough or careless
treatment mentioned in the User Manual including impact
and water damage
Restoring Factory Default Settings
Please follow the guidelines below to restore to factory default
settings:
1.
Place your STICKu on the charger
2.
Gently insert a pin into the small hole next to the USB port to
press the reset button
3.
Apply a small amount of pressure for 10 seconds (indicator
light will turn blue) until the STlCKu beeps 3 times
4.
STlCKu has successfully restored factory default settings and
will automatically switch off
5.
Remove
the
STICKu from the charger briefly and place it
back onto the charger to restart the device
Summary of Contents for STICKu
Page 1: ...1 User Manual ...
