background image

18

EN

Declaration of Conformity

Compliance Information for the European Union

(in accordance with ISO/IEC 17050-1)
No. HH2012032301

Product(s): 

 

EFL UMX ASK-21 BNF

Item Number(s): 

 

EFLU1280

Equipment class: 

 

1

The object of declaration described above is in conformity with the requirements of the specifi cations listed 
below, following the provisions of the European R&TTE directive 1999/5/EC and EMC Directive 2004/108/EC:

EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008    

EN55022: 2010
EN55024: 2010

Signed for and on behalf of: 
Horizon Hobby, Inc.
Champaign, IL USA
March 23, 2012 

Steven A. Hall

Vice President

International Operations and Risk Management

Horizon Hobby, Inc.

Warranty and Service Information

Country of 

Purchase

Horizon Hobby 

Address

Phone Number/Email Address

Horizon Service Center
(Electronics and engines)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
Online Repair Request visit:
www.horizonhobby.com/service

Horizon Product Support 
(All other products)

4105 Fieldstone Rd
Champaign, Illinois
61822 USA

877-504-0233
productsupport@horizonhobby.com

United Kingdom

Horizon Hobby Limited

Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

+44 (0) 1279 641 097
sales@horizonhobby.co.uk

Germany

Horizon Technischer 
Service

Christian-Junge-Straße 1
25337 Elmshorn
Germany

+49 (0) 4121 2655 100
service@horizonhobby.de

France

Horizon Hobby SAS

14 Rue Gustave Eiffel
Zone d’Activité du Réveil Matin
91230 Montgeron

+33 (0) 1 60 47 44 70
infofrance@horizonhobby.com

China

Horizon Hobby – China

Room 506, No. 97 Changshou Rd.
Shanghai, China, 200060

+86 (021) 5180 9868
info@horizonhobby.com.cn

United States 
of America

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s responsibility 
to dispose of their waste equipment by handing it over to a designated collections point 
for the recycling of waste electrical and electronic equipment. The separate collection and 
recycling of your waste equipment at the time of disposal will help to conserve natural 
resources and ensure that it is recycled in a manner that protects human health and the 

environment. For more information about where you can drop off your waste equipment for recycling, please 
contact your local city offi ce, your household waste disposal service or where you purchased the product.

Summary of Contents for E-FLITE UMX ASK-21






















Reviews: